Inspiration

Suggestions and solutions from ISOMAT!

1. The fall of a plaster may be due to its intense corrosion by water
2. First remove the loose parts of the plaster with a spatula
3. The surface is then thoroughly cleaned of dust.
4. The surface is primed with FLEX-PRIMER or NANO-SEAL to stabilize it.
5. The restoration is done after the primer dries, with DUROCRET. Their use requires only the addition of water.
6. The material is pressed with a trowel.
7. After it adheres enough, it is rubbed with a sponge
8. After the DUROCRET is dry, the surface is primed with FLEX-PRIMER and painted with FLEXCOAT.