Inspiration

Suggestions and solutions from ISOMAT!

1. The lack of water repellency in a plaster leads to its fragility and eventually to its detachment.
2. First remove the loose parts of the plaster with a spatula.
3. The surface is then thoroughly cleaned of dust.
4. The surface is primed with FLEX-PRIMER or NANO-SEAL to stabilize it.
5. The restoration is done with UNICRET-FAST, reinforced with the addition of ADIPLAST resin.
6. The materials are applied with a trowel, after the primer dries.
7. After the plaster has “pulled” sufficiently, it is rubbed with a sponge rub.
8. After the plaster dries, the surface is primed with FLEX-PRIMER and painted with FLEXCOAT.